---
title: "Decision Operator: \"Or\" Condition"
slug: "decision-operator-or-condition"
updated: 2025-09-25T20:54:53Z
published: 2025-09-25T20:54:53Z
canonical: "docs.unqork.io/decision-operator-or-condition"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.unqork.io/llms.txt
> Use this file to discover all available pages before exploring further.

# Decision Operator: "Or" Condition

## Overview

When configuring a Decision component, you'll set a condition for your data to meet. If your data meets that condition, the operator marks the data as True. If your data doesn't meet that condition, the operator marks the data as False. Quite often, you can construct your condition using one of the following symbols: <, >, =, >=, or <=. But sometimes, you might want to accept a few variations at once. Maybe you want to accept 2 specific values instead of anything greater than one value. For that, you can use an **OR** condition.

For example, let's say you want to let students check if a grade qualifies for graduation. Grades A, B, and C all qualify for graduation while grades D and F don't. It's difficult to represent this with a greater-than/less-than expression. So, instead, you'll use an **OR** statement in your Decision operator.

Here's how your module will look in the Module Builder:

![](https://cdn.us.document360.io/15548f06-2fba-434c-b0c1-5df88317dbd7/Images/Documentation/Dwf_DecisionOperator_Or_ME.jpg?sv=2026-02-06&spr=https&st=2026-11-08T10%3A18%3A10Z&se=2026-11-08T11%3A18%3A10Z&sr=c&sp=r&sig=HcUlEWoDGUvSeQQJbj9wfH%2B6FJCTSdIG%2FcLz2QUZDDM%3D)

Here's how the completed use case will look in Express View:

![](https://cdn.us.document360.io/15548f06-2fba-434c-b0c1-5df88317dbd7/Images/Documentation/Dwf_DecisionOperator_Or_Express.gif?sv=2026-02-06&spr=https&st=2026-11-08T10%3A18%3A10Z&se=2026-11-08T11%3A18%3A10Z&sr=c&sp=r&sig=HcUlEWoDGUvSeQQJbj9wfH%2B6FJCTSdIG%2FcLz2QUZDDM%3D)

## What You'll Learn

In this article, you'll learn how to use a Decision operator with an OR condition.

## What You'll Need

To set up this use case, you’ll need:

- 1 Columns component
- 1 Dropdown component
- 1 Hidden component
- 1 Button component
- 1 Data Workflow component

To set up your Data Workflow, you'll need:

- 1 Input operator
- 1 Decision operator
- 2 Create Value operators
- 2 Output operators

> [!NOTE]
> These instructions assume you have a new module open, saved, and with a title.

## Configuration

### Configure the Columns Component

Your columns act as containers for the components that follow.

1. Drag and drop a **Columns** component onto your canvas.
2. Enter colGrades in the **Property ID** field.
3. Select the **Column Layout** showing 2 evenly spaced columns.

![](https://cdn.us.document360.io/15548f06-2fba-434c-b0c1-5df88317dbd7/Images/Documentation/Dwf_DecisionOperator_Or_Col.jpg?sv=2026-02-06&spr=https&st=2026-11-08T10%3A18%3A10Z&se=2026-11-08T11%3A18%3A10Z&sr=c&sp=r&sig=HcUlEWoDGUvSeQQJbj9wfH%2B6FJCTSdIG%2FcLz2QUZDDM%3D)
4. Click **Save**.

### Configure the Dropdown Component

Next, let's give your end-users a way to select their grade. You'll use a Dropdown component for that.

1. Drag and drop a **Dropdown** component onto your canvas. Place your Dropdown in your left-hand column.
2. Enter finalGrade in the **Property ID** field.
3. Enter Final Grade in the **Label Text** field.
4. Set your **Option Label** and **Data Source Values** as shown below:

| Option Label | Data Source Values |
| --- | --- |
| A | a |
| B | b |
| C | c |
| D | d |
| E | e |
| F | f |

![](https://cdn.us.document360.io/15548f06-2fba-434c-b0c1-5df88317dbd7/Images/Documentation/Dwf_DecisionOperator_Or_Drop.jpg?sv=2026-02-06&spr=https&st=2026-11-08T10%3A18%3A10Z&se=2026-11-08T11%3A18%3A10Z&sr=c&sp=r&sig=HcUlEWoDGUvSeQQJbj9wfH%2B6FJCTSdIG%2FcLz2QUZDDM%3D)
5. Click **Save**.

### Configure the Hidden Component

Before you can configure your Data Workflow, you'll need a place to store its output. For that, you'll use a Hidden component. This shows as a pop-up message once your Data Workflow has run.

1. Drag and drop a **Hidden** component onto your canvas. Place your Hidden component beneath your columns.
2. Enter message in the **Property ID** and **Canvas Label Text** fields.
3. Click **Save**.

### Configure the Data Workflow Component

Now let's add your Data Workflow component.

1. Drag and drop a **Data Workflow** onto your canvas. Place your Data Workflow below your columns.
2. Enter dwfGraduationQualification in the **Canvas Label Text** and **Property Name** fields.

![](https://cdn.us.document360.io/15548f06-2fba-434c-b0c1-5df88317dbd7/Images/Documentation/Dwf_DecisionOperator_Or_Dwf.jpg?sv=2026-02-06&spr=https&st=2026-11-08T10%3A18%3A10Z&se=2026-11-08T11%3A18%3A10Z&sr=c&sp=r&sig=HcUlEWoDGUvSeQQJbj9wfH%2B6FJCTSdIG%2FcLz2QUZDDM%3D)

#### Configure the Input Operator

1. Drag and drop an **Input** operator onto your Data Workflow canvas.
2. Configure the **Input** operator's **Info** window as follows:

| Setting | Value |
| --- | --- |
| Category | Input |
| Component | finalGrade |
| Required | Yes |
| Source | Default |

#### Configure the Decision Operator

1. Drag and drop a Decision operator onto your Data Workflow canvas.
2. Configure the **Decision** operator's **Info** window as follows:

| Setting | Value |
| --- | --- |
| Category | Decision |
| Input List | finalGrade |
| Condition | OR(A="a",A="b",A="c") |
3. Connect the output port (right) of the **Input** operator to the input port (left) of the **Decision** operator.

#### Configure the First Create Value Operator

1. Drag and drop a **Create Value** operator onto your Data Workflow canvas.
2. Configure the **Create Value** operator's **Info** window as follows:

| Setting | Value |
| --- | --- |
| Category | Create Value |
| Label | Qualified Message |
| Expression/Value | "Qualified for Graduation!" |
3. Connect the upper output port (right) of the **Decision** operator to the top port of the Qualified Message **Create Value** operator.

#### Configure the First Output Operator

1. Drag and drop an **Output** operator onto your Data Workflow canvas.
2. Configure the **Output** operator's **Info** window as follows:

| Setting | Value |
| --- | --- |
| Category | Output |
| Component | message |
| Action | popMessage |
3. Connect the output port (right) of the Qualified Message **Create Value** operator to the input port (left) of the message **Output** operator.

#### Configure the Second Create Value Operator

1. Drag and drop a second **Create Value** operator onto your Data Workflow canvas.
2. Configure the **Create Value** operator's **Info** window as follows:

| Setting | Value |
| --- | --- |
| Category | Create Value |
| Label | Failed Message |
| Expression/Value | "Does not qualify for Graduation." |
3. Connect the lower output port (right) of the **Decision** operator to the top port of the Failed Message **Create Value** operator.

#### Configure the Second Output Operator

1. Drag and drop a second **Output** operator onto your Data Workflow canvas.
2. Configure the **Output** operator's **Info** window as follows:

| Setting | Value |
| --- | --- |
| Category | Output |
| Component | message |
| Action | popMessage |
3. Connect the output port (right) of the Failed Message **Create Value** operator to the input port (left) of the second message **Output** operator.
4. Click **Save**.

### Configure the Button Component

Finally, let's add a way for your end-users to trigger the operator. You'll use a Button component for that.

1. Drag and drop a **Button** component onto your canvas. Place your button below your Dropdown component.
2. Enter btnQualified in the **Property ID** field.
3. Enter Check Qualification in the **Label Text** field.
4. Select **Event** as the **Action Type**.
5. Enter dwfGraduationQualification in the **Trigger on Click** field.

![](https://cdn.us.document360.io/15548f06-2fba-434c-b0c1-5df88317dbd7/Images/Documentation/Dwf_DecisionOperator_Or_Btn.jpg?sv=2026-02-06&spr=https&st=2026-11-08T10%3A18%3A10Z&se=2026-11-08T11%3A18%3A10Z&sr=c&sp=r&sig=HcUlEWoDGUvSeQQJbj9wfH%2B6FJCTSdIG%2FcLz2QUZDDM%3D)
6. Click **Save**.
7. **Save** your module.

Now you can test your data workflow. Preview your module in Express View and select a grade. When you click your **Check Qualification** button, you'll see if the selected grade qualifies for graduation.

![](https://cdn.us.document360.io/15548f06-2fba-434c-b0c1-5df88317dbd7/Images/Documentation/Dwf_DecisionOperator_Or_Express(1).gif?sv=2026-02-06&spr=https&st=2026-11-08T10%3A18%3A10Z&se=2026-11-08T11%3A18%3A10Z&sr=c&sp=r&sig=HcUlEWoDGUvSeQQJbj9wfH%2B6FJCTSdIG%2FcLz2QUZDDM%3D)

## Lab

You can view this complete use case here: [https://training.unqork.io/#/form/601996c42b56d8025c33caa9/edit](https://training.unqork.io/#/form/601996c42b56d8025c33caa9/edit).